The FA400 is a gantry-type 5-axis machining center for large, heavy multi-axis parts, using a rigid gantry frame to hold accuracy over a big working envelope.
Technical specifications
| Item | Unit | Spec | |
|---|---|---|---|
| Travel Range | X-axis travel | mm | 550mm |
| Y-axis travel | mm | 750mm | |
| Z-axis travel | mm | 400mm | |
| Rotary axis C | deg | 0-360 | |
| Swing axis A | deg | ±100 | |
| Worktable | Clamping face (diameter) | mm | 400 |
| Max. Worktable Load | KG | 300 | |
| Spindle nose to table (A at 0°) | mm | 150-550 | |
| Spindle | Outer diameter | mm | 150 |
| Max. Spindle Speed | rpm | 18000 | |
| Power Supply | V | 380 | |
| Spindle Cooling | Oil cooling | ||
| Spindle taper | V | SHKA63 | |
| Screw / guideway | Roller-screw dia. / pitch | mm | X,Y,Z: Ф40mm/12mm |
| Guideway width | XYZ:45 roller | ||
| Tool Magazine | Tool-holder spec | T | SHKA63 |
| Magazine Capacity | tools | 32 | |
| Max. tool dia. (adjacent tool/empty) | mm | 75/150 | |
| Max. tool length | mm | 250 | |
| Tool-to-tool change time | s | 2.9 | |
| Electrical | Spindle Motor Power | KW | 15 |
| X/Y-axis motor | KW | 2.9 kW | |
| Z-axis motor (braked) | KW | 2.9 kW | |
| ACrotary table | DD (direct-drive) | RDD (direct-drive)S400 | |
| Speed | X/Y/Z cutting feed rate range | mm/min | 30000 |
| Rotary axis C | deg/min / rpm | 30 | |
| Swing axis A | deg/min / rpm | 30 | |
| Accuracy | Positioning accuracy (X/Y/Z) | mm | ±0.01/300 |
| Rotary C / swing A axis | deg | ±0.006 | |
| Repeatability (X/Y/Z) | mm | ±0.005 | |
| Rotary C / swing A axis | deg | ±0.004 | |
| Others | CNC System | Lynch N3 | |
| Air Pressure | 6 kgf/cm² | ||
| Dimensions (L×W×H) | mm | 2750*2600*3050 | |
| Machine Weight | kg | approx. 8000 |
Equipment
Standard equipment
- Bed — Cast Iron — Resin-sand casting (HT300)
- Bed — Lubrication Circuit — Automatic (Auto lubrication)
- Bed — Ball Screw — HIWIN (Taiwan)Ball Screw (Ball screw4012)
- Bed — Linear Guideway — INA (Germany)Linear guideway (XYZ: RG45(roller))
- Bed — Spindle — SufengHigh-speed motor spindle (HSKA63)
- Bed — ACrotary table — Haomai (RDD (direct-drive)S400)
- Electrical — Feed-motor type — Yaskawa (Japan) (XYZ: 2.9 kW)
- Electrical — Spindle — SufengHigh-speed motor spindle (15 kW)
- Appearance — Sheet-metal Enclosure — Full enclosure (White + black)
- Lubrication — Electric oiler — RGB electric oiler (Electric oiler)
- Lighting — Linear work lamp (MWD-F3-282)
- Chip Conveyor — Screw chip conveyor — ChienKuan (80OD)
- Accessories — Tool holders / collets — HSKA63 (6 pcs each)
- Accessories — Tools (1 set)
- Accessories — Tool-holder stand — HSKA63 (1 pcs)
- Accessories — Manual (USB e-document)
- Service — Freight — in/out province (in/out province)
- Service — Training — on-site (On-site)
- Service — Packing — Wooden-crate packing (Wooden-crate packing)
- Service — Warranty — 1 year (1 yr)
Optional equipment
- System — CNC: Shanghai RNC (Lynch N3)
- Tool Change — Pneumatic tool changer — FangguanServo magazine (Chain-type48 tools)
- Accessories — Tool setter (1 pcs)
About this model
This 5-Axis Machining Center is manufactured by our partner factory in Dongguan, China, and supplied direct by CENNETIC with factory-direct pricing, a standard warranty and remote setup support. Specifications are representative and can be confirmed against your machining requirements before order.
